22
NS-51P680A12/NS-59P680A12
www.insigniaproducts.com
Picture sizes available for input sources
Improving the image from a game console
You can improve the image and sound from a game
console by turning the Game Mode feature on or
off.
To turn the Game Mode feature on or off:
1 Press MENU. The on-screen menu opens.
2 Press
S or T to highlight Setup, then press
ENTER to access the Setup menu.
3 Press
S or T to highlight Game Mode, then
press ENTER.
4 Press
S or T to highlight Off or On, then press
ENTER. When Game Mode is turned on,
appears on the screen.
5 Press RETURN to return to the previous menu or
EXIT to close the menu.
Adjusting the computer image
To adjust the computer image:
1 Right-click a blank space on the Windows
desktop. The Display Properties dialog box
opens.
2 Click the Settings tab.
3 Drag the screen resolution slider to the correct
resolution. The best resolution is 1920 x 1080p.
4 If the dialog box has a vertical frequency option,
set it to 60 or 60 Hz.
5 Click OK to close the dialog box.
If the signal from the system equals the standard
signal mode, the screen is adjusted automatically.
If the signal from the system does not equal the
standard signal mode, adjust the mode (refer to
your video card user guide), or there may be no
video. For a list of compatible display modes, see
“PC/VGA scan rates” on page 43.
Input source Picture size
ATV, Video, Component (480i, 480p) 16:9, Zoom1, Zoom2, 4:3
Component (720p), Air 16:9, Wide Fit, 4:3
DTV (1080i), Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
16:9, 4:3, Wide Fit, Screen Fit
Notes
You can adjust and store settings for each external
device you have connected to an input of your TV.
Note
The Game Mode feature is only available if a game
console is connected to your TV.
Mode : Standard
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Picture
Sound
Channel
Setup
Input
Channel
Setup
Input
Language
Plug & Play
Time
Game Mode
: Off
V-Chip
Caption
Energy Saving
: Off
:English
Notes
When Game Mode is on:
• The picture mode is set to Standard and cannot
be changed.
• The sound mode is set to Custom and cannot be
changed. The Equalizer settings are reset to the
default settings. Use the Equalizer settings to
adjust the sound.
• If you open the on-screen menu, the menu
shakes slightly.
Note
The Display Properties dialog box may appear
different depending on your version of Windows and
your video card. However, these steps should work in
most cases.