29
www.insigniaproducts.com
3 Press S or T to highlight Signal Strength, then
press ENTER. The Signal Strength screen opens.
4 Press ENTER to close the Signal Strength screen.
5 Press RETURN to return to the previous menu or
EXIT to close the menu.
Setting parental controls
Setting or changing the password
To set up a password:
1 Press MENU. The on-screen menu opens.
2 Press
S or T to highlight Setup, then press
ENTER to access the Setup menu.
3 Press
S or T to highlight V-Chip, then press
ENTER to access the V-Chip menu. The V-Chip
password screen opens.
4 Press the number buttons to enter the
password, then press ENTER. The default
password 0000.
5 Press
S or T to highlight Change PIN, then
press ENTER.
6 Press the number buttons to enter the new
password, press ENTER, then enter the new
password again and press ENTER.
7 Press RETURN to return to the previous menu or
EXIT to close the menu.
Turning parental controls on or off
To set parental control levels:
1 Press MENU. The on-screen menu opens.
Note
You cannot fine-tune a digital channel. However, you
can adjust the antenna to improve the signal
strength.
Note
Parental controls are not available in HDMI or
component video mode.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Mode : Standard
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Picture
Sound
Channel
Setup
Input
Channel
Setup
Input
Language
Plug & Play
Time
Game Mode
: Off
V-Chip
Caption
Energy Saving
: Off
:English
V-Chip
Enter PIN
Mode : Standard
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Picture
Sound
Channel
Setup
Input
To Next Page
Loading...
