Insignia NS-59P680A12 - Removing Scrambled Channels from the Channel List; Opening the Channel List

25
www.insigniaproducts.com
5 Press S or T to highlight Air (antenna signal),
Cable (cable TV signal), or Auto (antenna and
cable TV signals), then press ENTER to start the
search. Your TV searches for channels in your
viewing area that have a signal and stores the
channel information in the channel list. After
your TV stores the channel information, it
deletes scrambled channels from the channel
list.
Removing scrambled channels from the
channel list
To remove scrambled channels from the channel
list:
1 Press MENU. The on-screen menu opens.
2 Press
S or T to highlight Channel, then press
ENTER to access the Channel menu.
3 Press
S or T to highlight Clear Scrambled
Channel, then press ENTER. Your TV removes
scrambled channels from the channel list. This
process may take 20 to 30 minutes. The status of
the process is shown on the screen.
4 Press RETURN to return to the previous menu or
EXIT to close the menu.
Opening the channel list
From the channel list, you can add or delete
channels from the channel list, add or delete
channels from the Favorite List, and schedule
reserved programs.
To open the channel list:
1 Press CH.LIST. The channel list opens with All
highlighted and all the channels in the channel
list are displayed. A appears next to the
channel your TV is tuned to.
2 Press
S or T to highlight a list, then press
ENTER to access the list. You can select:
• All—Shows all currently available channels.
• Added—Shows all added channels.
• Favorite—Shows all favorite channels. A
appears next to favorite channels in the
channel list. For more information, see
“Setting up a favorite channel list” on page 28.
• Reserve—Shows all current reserved
programs. A appears next to reserved
programs in the channel list. For more
information, see “Reserving programs” on
page 26.
3 Press OPTION to access a list of options, press
S or T to highlight an option, then press
ENTER.
Note
If you want to stop the search, press ENTER. The Stop
Auto Program? message appears. Press
W or X to
highlight Ye s , then press ENTER.
Note
The Clear Scrambled Channel feature only works in
cable mode.
Mode : Standard
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Picture
Sound
Channel
Setup
Input
Sound
Channel
Setup
Input
Antenna : Air
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
Signal Strength
Note
If you want to stop the clearing scrambled channels
process, press ENTER to highlight Stop, press W to
highlight Ye s , then press ENTER.
Clear Scrambled Channel
Removing scrambled channel.
Stop
3%
DTV Cable 122
All
Added
Favorite
Reserve
6 Air
6-1
TV #6
7 Air
7-1
TV #7
9 Air
9-1
TV #9
10 Air
10-1
TV #10
11-1
TV #11