14
NS-51P680A12/NS-59P680A12
www.insigniaproducts.com
Connecting a component video device
To connect a component video device:
1 Turn off your TV and all connected equipment.
2 Connect a component video cable (not
included) between the COMPONENT IN 1 or
COMPONENT IN 2 jacks on the back of your TV
and the COMPONENT VIDEO OUT jack on the
component video device.
3 Connect an audio cable (not included) between
the COMPONENT IN 1 L/R or COMPONENT
IN 2 R-AUDIO-L jacks on the back of your TV
and the AUDIO OUT jacks on the component
video device.
4 Turn on your TV, then turn on the component
video device.
Connecting a computer using DVI
To connect a computer using DVI:
1 Connect an HDMI/DVI cable (not included)
between the HDMI IN 1 (DVI) jack on the back
of your TV and the DVI jack on the computer.
2 Connect a 3.5 mm stereo plug to a dual-RCA
cable (not included) between the DVI AUDIO IN
jack on the back of your TV and the LINE IN jack
on the computer.
3 Turn on your TV, then turn on the computer.
Note
Make sure that you connect the video and audio to
matching jacks in the same row. For example, if you
connect the video to the COMPONENT IN 1 video
jacks, connect the audio to the COMPONENT IN 1
R-AUDIO-L jacks.
Back of TV
Component video cable
Audio cable
Note
If the computer has an HDMI jack, you can connect it
to the HDMI IN 1 (DVI) or HDMI IN 2 jack on the back
of your TV.
Back of TV
3.5 mm stereo plug to dual-RCA
HDMI/DVI cable
To Next Page
Loading...
