6
NS-CF43SS7
www.insigniaproducts.com
Main components
Setting up your refrigerator
Before using your refrigerator
• Remove the exterior and interior packing.
• Let the refrigerator stand upright for approximately four hours before
connecting it to power. This reduces the possibility of a malfunction in
the cooling system from improper handling during transportation.
• Clean the interior surface with lukewarm water using a soft cloth.
Finding a suitable location
• This refrigerator is designed to be free standing only, and should not
be recessed or built-in.
• Place your refrigerator on a floor that is strong enough to support the
refrigerator when it is fully loaded.
• Allow five inches of space between the back and sides of the
refrigerator and any surrounding walls. This allows the proper air
ventilation. Adjust the feet to keep the refrigerator level.
Cabinet tabletop
Ice tray (not
shown)
Interior light switch
Shelves
Crisper
Leveling foot
Freezer
door
Refrigerator
door
Freezer shelf
Thermostat/
controls
NS-CF43SS7_17-0447_MAN_V2_ENG.fm Page 6 Friday, June 2, 2017 11:14 AM
To Next Page
Loading...
Need help?
General
