18
Using the Stroboscopic mode
In the Stroboscopic (Multi) mode, the camera takes a rapid
series of flashes to capture multiple images of a moving
subject in a single photograph.
You can set the firing frequency (number of flashes per
second expressed as Hz), the number of flashes, and the
flash output.
1 Press the MODE button
one or more times to
select Multi
(Stroboscopic mode).
2 Turn the select dial to
choose the flash output
amount you want.
3 Press the SET button to select the flash frequency setting,
then turn the select dial to set the number.
4 Press the SET button again to select the number of
flashes setting, then turn the select dial to set the
number.
To Next Page
Loading...
Need help?
General
