25
Customizing function settings
(C.Fn)
You can adjust the following settings:
1 Press the ZOOM/C.Fn button for two seconds or longer
until the C.Fn menu is displayed. For the location of the
ZOOM/C.Fn button, see Control panel
on page 6.
2 Turn the select dial to select a function, then press the
SET button. The setting blinks.
3 Turn the select dial to select a setting, then press the SET
button.
4 Press the ZOOM/C.Fn button to exit the menu.
Custom
function
menu
option
Function Setting
Settings &
description
ST
Auto power off
(standby mode)
ON ON
OF OFF
AF AF-assist beam
ON ON
OF OFF
BL Backlight control
10 sec Off in 10 seconds
OF Always off
ON Always on
To Next Page
Loading...
