Insignia NS-DXA2 - RF Output Channel Selection; Configuring RF Output Channel

Insignia NS-DXA2 Digital to Analog Converter Box
14
www.insigniaproducts.com
Changing the RF output channel
To change the RF output:
1 Press MENU on the remote control. The Main Menu opens.
2 Press
S or T to select AV Settings, then press OK. The AV Settings menu opens.
3 Press
S or T to select RFM, then press OK. The RFM output menu opens.
4 Press
S or T to select the RF channel you want (CH-3 or CH-4), then press OK.
5 Press MENU to exit the on-screen menu.
NS-DXA2_13-0501_V1_ENG.fm Page 14 Monday, July 29, 2013 8:06 AM