Insignia NS-FCBK3 - STEP 2: Preparing the Cabinet Side Panels

10
www.insigniaproducts.com
STEP 2: Preparing the cabinet side panels
You n e ed:
1 Insert two wooden dowels (B) into the bottom edge of the left side panel (2), then use a Phillips screwdriver to
attach three long KD bolts (C) into the side panel. Don’t overtighten.
B Wooden dowels
7.8 x 30 mm (4)
C KD Bolt (long) (6)
Phillips screwdriver
2 Left side panel
3 Right side panel
C
B
2