Insignia NS-FCBK3 - STEP 10: Assembling the Bottom Drawer -1

19
3-Drawer File Cabinet - Black
www.insigniaproducts.com
STEP 10: Assembling the bottom drawer -1
You n e ed
1 Use a Phillips screwdriver to attach the bottom drawer left side (15) and the bottom drawer right side (16) to the
bottom drawer back (17) with four 3.8 x 35 mm screws (E). Make sure that the grooves on the back and side panels
face the inside of the drawer. Don’t overtighten.
2 Use a Phillips screwdriver to attach the two large drawer face brackets (I), flat side out, to the insides of the left and
right drawer sides using four 3.5 x 12 mm screws (G). Don’t overtighten.
3 Press the dowels on the drawer bottom brace (19) into the corresponding holes in the bottom drawer back (17).
The caster should face down and be positioned to the front of the drawer.
Phillips screwdriver
E 3.8 x 35 mm screw (4)
G 3.5 x 12 mm screw (4)
I Large drawer face bracket (2)
15 Bottom drawer left side 16 Bottom drawer right side
17 Bottom drawer back
19 Drawer bottom brace
G
1
9
I
1
7
1
5
E
1
6