Insignia NS-FCBK3 - Drawer Assembly Guide; Bottom Drawer Assembly

17
3-Drawer File Cabinet - Black
www.insigniaproducts.com
STEP 8: Preparing the drawer bottom brace
You n e ed:
1 Insert four wooden dowels (A) into the edges of the drawer bottom brace (19). Tap the dowels to seat them.
2 Using a Phillips screwdriver, attach a non-locking caster (J) to the front mounting block of the bottom brace (19)
with four 3.5 x 12 mm screws (G).
A Wooden dowels
5.8 x 30 mm (4)
Phillips screwdriver
J Caster back
(non-locking) (1)
G 3.5× 12 mm
screw (4)
19 Bottom brace
J
G
1
9
A