Insignia NS-FCBK3 - STEP 7: Installing the Cabinet Stiffeners

16
www.insigniaproducts.com
STEP 7: Installing the cabinet stiffeners
You n e ed:
1 Use a carpenter’s square to make sure that the cabinet is square.
2 Use a Phillips screwdriver to install six cabinet stiffeners (O) into the cabinet sides at equal intervals around the back
of the cabinet, using the 3 x 16 mm screws (N).
N 3 x 16 mm screw (6)
Phillips screwdriver
O Cabinet
stiffeners (6)
Carpenter’s square
°90
N
O