Insignia NS-FCBK3 - STEP 9: Preparing the Drawer Sides

18
www.insigniaproducts.com
STEP 9: Preparing the drawer sides
You n e ed:
1 Use a Phillips screwdriver to attach the drawer lock (U) into the bottom drawer right side (16) with two 3.5 x
12 mm screws (P).
2 Use a Phillips screwdriver to attach the drawer locks (U) to the two small drawer right sides (10) with two 3.5 x
12 mm screws (P) each.
T
Phillips screwdriver
10 Small drawer right side (2)
16 Bottom drawer right side
P 3.5× 12 mm screw (6)
U Drawer lock (3)
U
1
6
P
1
0
U
P
X 2