15
3-Drawer File Cabinet - Black
www.insigniaproducts.com
STEP 6: Installing the cabinet top
You n e ed:
1 Insert two large KD cams (D) into the left side panel and two large KD cams (D) into the right side panel. Make sure
that the cam lock arrows are pointing toward their corresponding cam-lock screw holes.
2 Place the cabinet top (1) on top of the assembly, align the KD bolts and dowels with the holes in the corresponding
pieces, then push the pieces together. Make sure that the edges of the panels are flush with each other, then
tighten the KD cams.
D KD Cam (large) (4) Phillips screwdriver
1 Cabinet top
1
D
To Next Page
Loading...
