20
www.insigniaproducts.com
STEP 11: Assembling the bottom drawer - 2
1 Slide the bottom drawer bottom (18) into the groove in the bottom of the bottom drawer. The front edge of the
drawer bottom should protrude slightly from the drawer assembly.
2 Use a Phillips screwdriver to attach the bottom drawer face (14) to the front of the bottom drawer using four 6 x
12 mm bolts (F). The two holes for the handle should be towards the top of the drawer.
Phillips screwdriver
18 Bottom drawer bottom
14 Bottom drawer face
F M6 × 12 mm
bolt (4)
M M4 x 25 mm
bolt (2)
L Handle (1)
1
8
To Next Page
Loading...
