25
3-Drawer File Cabinet - Black
www.insigniaproducts.com
4 Use a Phillips screwdriver to attach the handle (L) to the front of the drawer using two 4 x 25 mm bolts (M).
5 Insert a small KD cam (W) into the hole in the small drawer bottom brace (13).
6 Use a Phillips screwdriver to attach the middle drawer face (7) to the front of the other small drawer using two M6 ×
12 mm bolts (F), then tighten the KD cam on the small drawer bottom brace.
7 Use a Phillips screwdriver to attach the handle (L) to the front of the drawer using two 4 x 25 mm bolts (M).
F
L
8
M
W
L
W
F
M
7
To Next Page
Loading...
