15
NS-OTRC15SS9
www.insigniaproducts.com
3 To remove the charcoal filter, push it inward, then lift it up and pull it away from the microwave.
4 Open the light cover (behind the filter mount) by carefully pulling up on its front edge.
5 Remove the old light bulb and replace with a new, equivalent bulb. Do not use a bulb larger than 30W.
6 Push the light cover back into place and replace the charcoal filter.
7 Replace the vent grill (make sure that the tabs lock into place) and secure with the two screws.
8 Turn your circuit breaker back on, or plug in your microwave.
NS-OTRC15SS9_17-0926_User MAN_V1_ENG.fm Page 15 Friday, February 9, 2018 3:45 PM
To Next Page
Loading...
Need help?
General
