Insignia NS-PDP50 - Connecting More Devices; Connecting an HDMI Device; Connecting a Component Device

7 07-287 NS-PDP50 EnglishOnly.fm Page l0 Wednesday, July II, 2007 12:05 PM
_iiii/i]i[iii!
iNSiGNiA
Is 2_I_1 I I,_ I',_,,3" IJ ,=k/ .......... v ;],k/
Connect the right audio (red) and left audio
(white) plugs on a standard audio cable to
the AV IN1 (back) or AV2 (side) jacks on
your plasma TV, then connect the plugs on
the other end of the cable to the right audio
out and left audio out jacks on the external
device.
Connecting an HDMI device
Note
An HDMI cable carries both video and audio. You
do not need to make additional audio connections,
To connect an HDMI device:
3 Turn on your plasma TV and the device.
4 Press INPUT one or more times to select
AVl or AV2.
Connecting a component device
To connect a component device:
1 Connect the plugs on a component cable to
the COMPONENT IN 1 or COMPONENT
IN 2 (Y, Pb, and Pr) jacks on the back of your
TV, then connect the plugs on the other end
of the cable to the component out jacks on
the back of the external device.
Y PB PR (R) AUDIO (L)
Connect an HDMI cable to the HDMII/DVl or
HDMI2 jack on the back of your plasma TV,
then connect the other end of the cable to the
HDMI out jack on the external device.
Y
L__J
Connect the right audio (red) and left audio
(white) plugs on a standard audio cable to
the COMPONENT 1 or COMPONENT 2
(AUDIO L and AUDIO R) jacks on the back
of your plasma TV, then connect the plugs on
the other end of the cable to the right audio
out and left audio out jacks on the external
device.
3 Turn on your plasma TV and the device.
4 Press INPUT one or more times to select
COMPONENT 1 or COMPONENT 2.
2
3
HDMI=DVD OUTPUT
Turn on your plasma TV and the device.
Press INPUT one or more times to select
HDMII/DVl or HDMI2.
Note
If the external device supports the Auto HDMI
function, the screen resolution is automatically set
to 1280 x 720p.
If the external device does not support the Auto
HDMI function, you need to set the screen
resolution to 1280 x 720p.