07-287 NS-PDP50 English Only.fm Page 8 Wednesday, July 1l, 2007 12:05 PM
_iiiii/ii!i)_
INSIGNIA
_iiiiii_iii
< _ _ ' < <_)%YO_'_t*)O D;,<;[?,S
Is 2_I_1 I I,_ I',_,,3" IJ ,=k/ .......... v ;],k/
Bundling cables
You plasma TV has a cable management
bracket that lets you bundle the cables for all the
device you install.
Positioning your plasma TV for ventilation
When you position your plasma TV, make sure
that you leave 4 inches (10.16 cm) of space on
all sides.
To bundle the cables:
1 Hold the cable management bracket with
both hands, then pull it in the direction shown
to remove it.
Connect all external devices and the power
cord.
4" (10.16 cm)
o
£
4" (10.16 cm)
t
o
£
L
Grounding
Make sure that you connect the earth ground
wire to prevent possible electric shock. If
grounding methods are not possible, have a
qualified electrician install a separate circuit
breaker.
Power outlet
breaker
Pull the cables through the opening on the
cable management bracket.
Do not try to ground the unit by connecting it to
telephone wires, lightening rods, or gas pipes.
4 Reinstall the cable management bracket.
To Next Page
Loading...
