Insignia NS-PDP50 - Specifications and Remote Programming; Product Specifications; Programming the Remote Control

® 07-287 NS-PDP50 English Only.fm Page 26 Wednesday, July II, 2007 12:05 PM
_iiiii/ii_iiiii
|N$|GN|A
iilii!!iili!J
Is 2_I_1 I I,_ I',_,,3" IJ ,=k/ .......... v ;],k/
Specifications
Specifications subject to change without notice.
Powerrequirement AC100-240V@50/60Hz
Televisionsystem NTSC-M
ATSC
64and256QAM
i:cianneicoveiage.... VHFi:i
UHF14-69
CATV1-135
:DTV2-69
CADTV1-135
Externalantennaimpedance 75ohm
Temperature Operating:
32°to 104°F(0°to 40°C)
Storage: ,:
-4° to 104°F(-20° to 60°C)
Humiiiiy .....................Opeiaiingi<80% ........................................
Storage:< 85%
Dimensions(WxH xDi ....inciuaingsiandi
If the device turns off, you have programmed
the remote control correctly.
Note
If you do not enter a code within 20 seconds of
pressing MENU and MUTE, programming is
cancelled.
Press MENU to store the code. The remote
control LED blinks twice, and the code is
stored.
Test various remote control buttons with the
device. If some of the buttons do not work
correctly, repeat this task and enter a
different code.
Remote control codes
VCRs
AKAI 016043046 PANASONIC 066070074 ii
124125146 083133140 i/
145
................ AMPRO 072 ; PENTAX 013020031
i: b,.._x ._q.._x ,q.u mcnes i: 033063
_lx3c_u2d6n;ItTa_dX:35.58cm)
51.3x31.9 x 4.2inches AUDIO 012023039 PHILIPS : 031033034
(13026 x 810 x 1077cm) DYNAMICS 043 054067071
.......................... : .........:..... : ;_ 101
Weight Includingstand: ............. .........................................................................................................................
BROKSONIC 035037129 PILOT 101 ;
114.4Ibs.
(51
.9
kg)
cANoN ...........................................028 03i 033........PioNEER.......................0i3 02i 048........il
Excludingstand: CAPEHART i08 ................................PORTLAND...............i08 .......................
Programming the remote
control
You can program the provided remote control to
operate most remote controllable devices.
Note
The provided remote control may not work with all
models or brands.
To find out if the remote control can operate
a device without programming:
1 Turn on the device (such as a VCR), then
press the corresponding mode button on the
remote control for the device.
Press POWER. If the device turns off, you do
not need to program the remote control. If the
device does not turn off, you need to program
the remote control
To program the remote control:
1 Turn on the device (such as a VCR), then
press the corresponding mode button on the
remote control for the device.
2 Press and hold MENU and MUTE at the
same time for two seconds. The button for
the currently selected device lights.
3 Press the number buttons for the appropriate
code for the device. For a list of codes, see
"Programming the remote control" on
page 26.
4 Press the mode button for the device. If the
device turns off, you have programmed the
remote control correctly.
CRAIG 003040135 PULSAR 072 !
CORTiSMATHES03i 03304i ................60ART2.............................0ii 0i4 ..................................
DAEwoo 005007Oi0 QOASAR 075
064065108 145
110111112
116117119
....DAYTRoN ......i o8 ......RCA ....Oi 033.....
034040041
O62O63I07
I 09140144
145147 :!
DBx 0i2023039.... REALSTC 0030680i6
043 014031033
034040053
054101
DYNATECH 034053 RICO 058
ELECTROHOME059 RUNCO 148
EMERSON 006017025 SALORA 014 !i
027029031
034035036
037046101
129131138 {_
153
FisHER ....003008009.... SAMSUNG.... 032040i02 !:
010 104105107
109112113
115120122
125
NAi ...........................................................034 .....SANSUi...............................022 04304i .........
135 iii
....iE ....Oii 01i 0i1 ........iiNY6 ......Oii iii 0ii i
072107109 014102134
144147 :}
v DEo 132136 SCOtt 0i7037112
129131
26
III <+¢_>i*,/ < >"