® 07-287 NS-PDP50 English Only.fm Page 21 Wednesday, July II, 2007 12:05 PM
i;]_ i_/,-_ih _IQ ©_'_©;_"_ ..... /D/;;_,_,-__ -_ _ "_"_ D
Selecting the aspect ratio
Note
When you connect a PC to the RGB-PC or
HDMII/DVI jack, you can only select 4:3 or 16:9
for the aspect ratio.
_iiiii/ii_ii!!
iNSiGNiA
;_ii!!i!iiiiiii
Zoom 2-Extends the image vertically, and crops
the top and bottom of the image.
Note
Your plasma TV automatically selects the aspect
ratio based on the video input source. You can
also select the aspect ratio from the OPTION
menu.
To select the aspect ratio:
• Press ZOOM one or more times to select the
aspect ratio you want. You can select:
4:3-Displays the program at the original 4:3
ratio.
Selecting the on-screen display (OSD)
language
To select the OSD language:
1 Press MENU, then press A or v to select
OPTION. The OPTION menu opens.
16:9-Stretches the image to fill the screen.
Horizon-Enlarges the sides of the image.
Zoom 1-Displays the image with the original
ratio. The top and bottom of the image are
cropped.
2 Press _, then press A or T to select
Language.
3 Press p,, then press A or T to select the
language you want. Your plasma TV
remembers the language you selected and
will always use that language when
displaying the OSD menus.
4 Press EXIT to return to TV viewing, or press
MENU to return to the previous menu.
Checking the DTV signal strength
If you are in DTV or CADTV mode and the
reception is poor, you can check the DTV signal
strength. If the signal strength is poor, you many
need to adjust your antenna or digital cable
input.
To check the DTV signal strength:
1 Press MENU, then press A or T to select
SETUP. The SETUP menu opens.
21
To Next Page
Loading...
