35
4-Burner Electric Range
www.insigniaproducts.com
Surface units not
functioning properly
The surface units are not
plugged in solidly.
With the controls off, check to
make sure the surface unit is
plugged completely into the
receptacle.
The surface unit controls
improperly set.
Check to see the correct control is
set for the surface unit you are
using.
OVEN
Oven light does not work Light bulb is loose or
defective.
Tighten or replace the bulb.
Switch operating light is
broken.
Call for service.
Oven will not work Plug on range is not
completely inserted in the
electrical outlet.
Make sure electrical plug is
plugged into a live, properly
grounded outlet.
A fuse in your home may be
blown or the circuit breaker
tripped.
Replace fuse or reset circuit
breaker.
Oven controls improperly
set.
See Using the oven
on page 15.
Food does not bake or
roast properly
Oven controls improperly
set.
See Using the oven
on page 15.
Rack position is incorrect or
the rack is not level.
See Using the oven on page 15.
Incorrect cookware or
cookware of improper size
being used.
See Using the oven
on page 15.
Oven thermostat needs
adjustment.
See Adjust the oven thermostat?
Easy to do yourself! on page 24.
Food does not broil
properly
Improper rack position
being used.
See the Broiling guide on page 18.
Food being cooked in a hot
pan.
Use the broiling pan and grid that
came with your range. Make sure it
is cool.
Aluminum foil used on the
broiling pan and grid has
not been fitted properly and
slit as recommended.
See Using the oven
on page 15.
In some areas the power
(voltage) may be low.
Preheat the broil element for 10
minutes.
Broil for the longest period of time
recommended in the Broiling
guide on page 18.
PROBLEM POSSIBLE CAUSES WHAT TO DO
To Next Page
Loading...
Need help?
General
