21
4-Burner Electric Range
www.insigniaproducts.com
Using the clock and timer
To set the clock
The clock must be set to the correct time of day for the automatic oven timing
functions to work properly. The time of day cannot be changed during a timed
baking.
1 Touch the CLOCK pad twice.
2 Touch the + or – pads.
If the + or – pads are not touched within one minute after you touch the
CLOCK pad, the display reverts to the original setting.
If this happens, touch the CLOCK pad and reenter the time of day.
3 Touch the START/ON pad until the time of day shows in the display. This
enters the time and starts the clock.
To check the time of day when the display is showing other information,
simply touch the CLOCK pad. The time of day shows until another pad is
touched.
To turn off the clock display
If you have several clocks in your kitchen, you may wish to turn off the time of
day clock display on your range.
1 Touch the CLOCK pad once to turn off the time of day display. Although you
will not be able to see it, the clock maintains the correct time of day.
2 Touch the CLOCK pad again to recall the clock display.
To set the timer
The timer does not control oven operations. The maximum setting on the timer
is 9 hours and 59 minutes.
1 Touch the TIMER pad.
2 Touch the + or – pads until the amount of time you want shows in the
display.
The maximum time that can be displayed in minutes is 59. Times entered
more than 59 minutes will display in hours and minutes.
If you make a mistake, touch the TIMER pad and begin again.
3 Touch the START/ON pad. The time will start counting down, although the
display does not change until one minute has passed.
4 When the timer reaches :00, the control will beep 3 times followed by one
beep every 6 seconds until the TIMER pad is touched.
Note: The timer is a minute timer only. The OFF pad does not affect the timer.
To Next Page
Loading...
Need help?
General
