Remove & Install Steam Release Assembly
Remove: Pull steam release valve up and off steam release pipe.
Steam release valve must be installed before use, and cleaned frequently. installed before use and
cleaned after each use.
Install: Place steam release valve on steam release pipe and press down.
Fits loosely when installed properly, but will remain in place when the lid is turned over.
Remove & Clean Inner Pot
Remove inner pot from cooker base and wash with hot water and dish soap before first use. Wipe
outer surfaces of inner pot and heating element to ensure they are dry and free of food debris. Failure
to do so may damage the cooker.
Place inner pot into cooker base before cooking. Food must be placed only in the inner pot, not cooker
base.
The inner pot is an integral part of product safety. Always use an authorized Instant Pot® inner pot
made for this model when cooking. Failure to do so may cause personal injury or property damage.
To Next Page
Loading...
