instantpot.com | 19
Settings
Setting Description
Set a Delay Start timer.
Delay Start can be set from between
10 minutes (00:10) and 24 hours (24:00).
01 Select a Smart Program and tweak it as
needed, then press Delay Start.
Once pressed, there is no way to go back
to the Smart Program settings. You’ll have
to press Cancel and start again.
02 When the hours eld ashes, use the
− / + Time buttons to adjust the hours.
03 Press Delay Start again to toggle to the
minutes eld and use the − / + Time
buttons to adjust the minutes.
04 Press Start to begin.
When Delay Start ends, the Smart Program
begins and the display shows On.
Delay Start is not available with the Sauté,
Sous Vide or Yogurt Smart Programs.
Reset an individual smart program.
When in standby, press and hold one Smart
Program button until the multicooker returns
to Standby and displays OFF.
The Smart Program’s pressure level, cooking
time and temperature are restored to the
factory default setting.
Reset all smart programs.
When in standby, press and hold Cancel until
the multicooker beeps.
All Smart Program pressure levels, cooking
times and temperatures are restored to the
factory default setting.
To Next Page
Loading...
Need help?
General
