3.1. Reprogramming the master code
Notes:
• Immediately change the factory-set code 1 2 3 4 5 6 for security reasons.
• The programming can only be done when the lock is open.
• Do not use any personal data for your new code such as birthdays or other
information that could be guessed from knowledge about you.
• After you have entered the new code, open and close the electronic lock
several times with the new code while the door is open.
*0*
Enter the program number
123456 *
1
Enter the old master code
654321 *
Enter the new master code
654321 *
1
Enter the new master code
3.2. Reprogramming the master code with emergency opening lock
In conjunction with an emergency opening lock, the master code can be
reprogrammed without knowledge of the current master code. The emergency
opening lock must be open for this.
*0*
Enter the program number
654321 *
Enter the new master code
654321 *
1
Enter the new master code
To Next Page
Loading...
