3.4. 4-eyes principle
Notes:
• The 4-eyes principle can only be set with the master code.
• This setting can only be made when the lock is open. After this function has
been programmed (activated), the lock can only be opened when two codes
are entered.
• The programming or deletion of the 4-eyes principle is saved in the event log.
(For reading out the event log, see the manual of the PC software
CombiComm)
• In addition to the master code, at least one user code must be programmed.
Activating the 4-eyes principle
*2*
Enter program number 2
123456 *
Enter the master code
1*
1
Activate the 4-eyes principle
Deleting the 4-eyes principle
*2*
Enter program number 2
123456 *
Enter the master code
0*
1
Delete the 4-eyes principle
Opening with the 4-eyes principle
1 010101
1
Enter the user number of the first code (e.g. 1) and
enter the first code (e.g. 010101)
1
Green LED is lit.
2 020202
1
Enter the user number of the second code (e.g. 2) and
enter the second code (e.g. 020202)
To Next Page
Loading...
