Integra DOSE IT - Process Documentation (Optional)

DOSE IT – Operating instructions V08 Operation
www.integra-biosciences.com 21
4.8 Process documentation (optional)
To document the dispensing and pumping performed with a DOSE IT, relevant data can
be recorded either on paper or in an electronic text file. The following data – exemplified
by a dispensing program – are recorded:
• At the start of the process
========================================
DOSE-IT (SN:00000000)
***Start dispense
Date/time: 02.11.2006/18:01
***Program settings
Name: MY PRG1
Tubing-ID: 4.0mm
Volume: 10.0ml
Repetitions: 20
Pause: 1.0s
Flow rate: 500.0ml/min
Direction: CW
No. of heads: 1
========================================
• After calibration
========================================
DOSE-IT (SN:00000000)
***Calibration done
Date/time: 02.11.2006/18:05
Tubing-ID: 4.0mm
========================================
• At the end of the process
========================================
DOSE-IT (SN:00000000)
***End dispense
Date/time: 02.11.2006/18:02
Repetitions: 20
***Program settings
Name: MY PRG1
Tubing-ID: 4.0mm
Volume: 12.0ml
Pause: 1.0s
Flow rate: 500.0ml/min
Direction: CW
No. of heads: 1
========================================
Note: This parameter
has been changed
during the process.