DOSE IT – Operating instructions V08
www.integra-biosciences.com 3
Table of contents
Chapter 1 Introduction
1.1 Intended use ..................................................................................5
1.2 Symbols used.................................................................................5
1.3 Safety notes ...................................................................................6
Chapter 2 Description of the device
2.1 Scope of delivery............................................................................7
2.2 Overview of the DOSE IT...............................................................7
Chapter 3 Installation
3.1 Power supply connection ...............................................................9
3.2 Retort rod and filling arm (optional)................................................9
Chapter 4 Operation
4.1 Selection and loading of the tubing ..............................................10
4.2 Parameter settings .......................................................................13
4.3 Adjusting the dispensing program................................................15
4.4 Calibrating the pump ....................................................................18
4.5 Performing the dispensing process..............................................19
4.6 Working in Pump mode................................................................19
4.7 Using the double pumphead configuration (optional)...................20
4.8 Process documentation (optional)................................................21
4.9 Using the foot and benchtop switch .............................................22
4.10 Remote control by a PC .............................................................22
Chapter 5 Maintenance
5.1 Cleaning and servicing.................................................................23
5.2 Decontamination ..........................................................................23
5.3 Leak Test .....................................................................................23
5.4 Disposal .......................................................................................24
Chapter 6 Technical data
6.1 Environmental conditions .............................................................25
6.2 Specifications ...............................................................................25
6.3 Current consumption depending on input voltage........................25
6.4 Chemical compatibility .................................................................26
To Next Page
Loading...
