16
> Before start > Hookup > Setup > Playback > Part Names
Step5: Multi-zone Connection
ZONE2 PRE/LINE OUT
ZONE SPEAKER
1
2
ZONE2
MAIN ROOM
LINE
IN
BD/DVD
1 Analog audio cable, 2 Speaker cable
ZONE 2 PRE/LINE OUT /
ZONE SPEAKER
You can enjoy audio in the separate room by, for example,
playing a Blu-ray Disc player in the main room (where this
unit is located) and listening to internet radio in the
separate room (ZONE 2).
Connections with an AV component
When outputting the audio of an external AV component
to ZONE 2, you need to connect using an analog audio
cable.
ZONE 2 PRE/LINE OUT
It is possible to play 2 ch source in a separate room while
7.1 ch source is being played in the main room. Connect
the ZONE 2 PRE/LINE OUT jacks of the unit and the
LINE IN jacks of the pre-main amplifier or the power
amplifier in a separate room with an analog audio cable.
ZONE SPEAKER
It is possible to connect speakers in a separate room and
play 2 ch sources.
0 During ZONE 2 playback, no sound is heard from the
surround back speakers or the height speakers and a
maximum of 5.1 channel playback is possible in the
main room. Listening modes such as the Dolby Atmos
modes cannot be selected.
0 When Bi-Amping connection is used for the front
speakers, you cannot output to ZONE SPEAKER.
Setup
0 Settings are required in Initial Setup, "4. Multi
Zone Setup" (
Ä
P19) to enjoy this feature.
SN29402195_DRX-2_BAS_En_1602xx.book 16 ページ ２０１６年２月２２日 月曜日 午前１０時４分
To Next Page
Loading...
Need help?
General
