10
Height Speakers-2
(Ceiling Speakers)
These are types of height speakers. Furthermore, by
installing height speakers, you can select the Dolby Atmos
listening mode, which realizes the most up-to-date 3D
sound including overhead sounds, when the input format is
Dolby Atmos.
Fit top front speakers on the ceiling forward of the seating
position, top middle speakers on the ceiling directly above
the seating position, and top rear speakers on the ceiling
behind the seating position. The distance between each
pair should match the distance between the two front
speakers. Note that with height speakers you can install up
to two sets; Height 1 Speaker and Height 2 Speaker.
0 Dolby Laboratories recommends placing this type of
height speakers to obtain the best Dolby Atmos effect.
0 "Speaker combinations" (P13) introduces some detailed
examples of speaker combinations.
9,10 Height Speakers
0 Top Front Speakers
0 Top Middle Speakers
0 Top Rear Speakers
> Before Start > Part Names >Install > Initial Setup > Playback > Advanced Manual
Troubleshooting | Supplementary Information, etc.
¢
1: 30e to 55e,
¢
2: 65e to 100e,
¢
3: 125e to 150e
To Next Page
Loading...
Need help?
General
