7
It
De
Names and functions of parts
Front
Í On/Standby button: Press this button to turn the
unit on or put it in standby mode.
Speaker A button: Used to switch between outputting
and turning off output from speakers connected to the
SPEAKERS A terminal.
Remote control signal receiver
Hybrid Standby LED: Lights when any of Network
Standby, Bluetooth Wakeup, or Opt1 In Wakeup are
on.
Speaker B button: Used to switch between outputting
and turning off output from speakers connected to the
SPEAKERS B terminal.
Display button: Change the information shown.
Display (> 8)
Setup button: Used to display the setup menu.
Direction/Tuning 34/Preset 21/Enter buttons:
Move the cursor and confirms the selection. When
listening to AM/FM broadcasting, tune in to the station
with Tuning 34 or select the registered station with
Preset 21.
Return button: Returns the display to the previous
state during setting or operation.
Master Volume control: Used to adjust the volume.
Phones terminal: Connect headphones with a
standard plug.
Dimmer button (North American model): Use this
button to switch the display’s brightness between
normal, moderately dark and dark.
RT/PTY/TP button (Australian model): Use when
receiving stations transmitting text information.
Zone 2/Off buttons: For use when the unit is
connected with a pre-main amplifier, a power amplifier
or a subwoofer with built-in amplifier in a separate
room and sound is played there.
Input control: Selects the source to playback.Turn the
control to switch the source in the following order; BD/
DVD#CBL/SAT#PC#GAME#CD#PHONO#
TV/TAPE#AM#FM#NET#BLUETOOTH
Bass control: Adjusts the bass level.
Treble control: Adjusts the treble level.
Balance control: Adjusts the audio output balance
between the left and right speakers.
Memory/Menu button: Press this button to register a
AM/FM station or display the menu.
Tuning Mode/Play/Pause button: Press this button to
switch the AM/FM tuning mode, or playback (*) or
pause (*) of a track.
Preset 21/Skip (:/9) buttons: Press this
button to select the registered AM/FM station, or skip
(*)
to tracks before or after the current track.
USB port: A USB storage device is connected so that
music files stored in it can be played.
*
Operate with USB storage device play or the home network
feature (DLNA, Home Media).
(Australian model)
DTM40.7_mst.book 7 ページ ２０１５年７月２４日 金曜日 午後１２時５８分
To Next Page
Loading...
