Need help?Do you have a question about the Integra DTR-40.5 and is the answer not in the manual?
General| Audio Channels | 7.2 |
|---|---|
| Total Harmonic Distortion (THD) | 0.08% |
| Frequency Response | 10 Hz - 100 kHz |
| HDMI Inputs | 6 |
| HDMI Outputs | 2 |
| Network Connectivity | Ethernet, Wi-Fi |
| THX Certified | No |
| HDMI Version | 2.0 |
| 4K Passthrough | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Zone 2 | Yes |
| Phono Input | Yes |
| Input Sensitivity/Impedance | 200 mV / 47 kOhms |
| Bluetooth | Yes |
| USB Port | 1 |
| HDCP Version | 2.2 |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio |
| Streaming Services Supported | Spotify, Tidal, Pandora |
| Network Features | Firmware Updates |
| Audio Inputs/Outputs | 2 analog outputs |
| Digital Audio Inputs | 1 x Optical, 1 x Coaxial |
Essential safety guidelines for operating the apparatus.
Critical warnings about electric shock, fire hazards, and component safety.
Technical specifications of the amplifier section.
Details on video processing technologies and audio formats.
Overview of available input/output ports and connectivity options.
Additional features like presets, room correction, and display settings.
Explanation of icons seen on the AV receiver's display during media playback.
How to use the remote to control the AV receiver's functions.
Instructions for inserting batteries into the remote controller.
How to choose the display language for setup menus.
Introduction to the automatic speaker setup process.
Basic operations for playing audio/video sources.
How the screen saver activates and how to configure it.
Accessing frequently used settings via Quick Setup.
Navigating the main setup menu organized into categories.
Adjusting various audio settings like Bass, Treble, and Audyssey.
Adjusting video settings like Wide Mode and Picture Mode.
Changing the remote control ID for multi-component systems.
Locking setup menus to prevent unauthorized changes.
Buttons pre-programmed for controlling common components.
Finding remote control codes via the on-screen menu.
Steps to enter remote control codes for components.
Assigning custom functions to colored remote buttons.
Restoring default remote control codes for buttons.
Resetting the entire remote controller to default settings.
Using the remote to control a TV, especially with RIHD.
Programming the remote to control an Apple TV.
Programming the remote for MHL devices connected via AUX input.
Controlling players with RIHD capabilities.
Remote control buttons for TV operations.
Remote control buttons for Blu-ray/HD DVD players.
Remote control buttons for DVD players/recorders.
Remote control buttons for VCR/PVR operation.
Remote control buttons for cassette tape decks.
Remote control buttons for satellite/cable receivers.
Remote control buttons for CD/MD players/recorders.
Factory reset procedure for the AV receiver.
Troubleshooting power-related issues like not turning on or shutting off.
Troubleshooting no sound or low volume issues.
Troubleshooting when only front speakers are active.
Troubleshooting audio interference and noise.
Troubleshooting when there is no picture on the TV.
Troubleshooting remote control issues.
Troubleshooting issues controlling external components.
Troubleshooting no sound from Zone 2 speakers.
Troubleshooting Wi-Fi connection and playback issues.
Troubleshooting Bluetooth playback issues after connection.
Troubleshooting poor audio quality with Bluetooth devices.
Troubleshooting initial Bluetooth connection problems.
Troubleshooting server and internet radio access issues.
Troubleshooting RI (Remote Interactive) function issues.
Troubleshooting high ambient noise during speaker setup.
Information on 2.4 GHz radio wave interference and precautions.
Limitations and conditions for using the AV receiver, especially regarding radio waves.
Legal disclaimer regarding content, services, and liability.
Table showing video signal output resolutions for different inputs.
Steps for performing firmware update via network.
Preparations before starting firmware update.
Error codes and solutions for network firmware updates.
Instructions for updating firmware using a USB storage device.
Step-by-step guide for updating firmware via USB.
Error codes and solutions for USB firmware updates.
Explanation of HDMI interface, supported formats, and HDCP.
List of audio formats supported over HDMI.
Information on HDCP and digital content protection.
Guidelines for Ethernet network and router setup.
Requirements for media servers for playback.
Requirements for USB storage devices for playback.
Detailed specifications for the amplifier.
Specifications related to video processing and outputs.
Specifications for the AM/FM tuner.
Specifications for network connectivity.
Specifications for Bluetooth functionality.
HDMI interface specifications and supported features.
List of available input/output ports.
To Next Page
