Need help?Do you have a question about the Integra DTR-9.9 and is the answer not in the manual?
General| Channels | 7.1 |
|---|---|
| HDMI Outputs | 2 |
| Component Video Inputs | 3 |
| Component Video Outputs | 1 |
| Digital Audio Inputs (Optical) | 3 |
| Digital Audio Inputs (Coaxial) | 3 |
| Composite Video Inputs | 4 |
| Composite Video Outputs | 1 |
| Analog Audio Inputs | 6 |
| Analog Audio Outputs | 1 |
| HDMI Inputs | 6 |
| Audio Formats Supported | Dolby TrueHD, DTS-HD Master Audio, Dolby Digital Plus, DTS-HD High Resolution Audio |
| Network Connectivity | Ethernet |
| THX Certified | Yes |
| Multi-Zone Capability | Yes |
| THD | 0.05% |
| Frequency Response | 5Hz-100kHz (+1dB, -3dB) |
| Input Sensitivity/Impedance | 200 mV / 47 kΩ |
| Signal-to-Noise Ratio | 110 dB |
Details on amplifier specifications including power output and distortion levels.
Lists the various input and output terminals available on the AV receiver.
Overview of the buttons and indicators on the AV receiver's front panel.
Instructions for opening the compartment and inserting batteries.
Guidance on pointing the remote towards the AV receiver's sensor.
Explanation of different operating modes for controlling various components.
Details on connecting speakers for different channel configurations.
Instructions for connecting the subwoofer to the PRE OUT jack.
Quick steps for initial system setup after powering on.
Configuring video output settings for TV connection.
Automated speaker calibration for optimal room acoustics.
How to choose and switch between different audio/video input sources.
Temporarily adjusting the volume for individual speakers.
Instructions for tuning into AM and FM radio stations.
Guide to receiving and listening to HD Radio broadcasts.
Steps to install and set up the SiriusConnect Home tuner.
Procedure for recording the currently selected audio/video input.
Instructions for overdubbing audio onto video recordings.
How to choose and activate various sound processing modes.
Organizational overview of the AV receiver's setup menus.
Detailed configuration of connected speakers, including crossover and distance.
Settings for adjusting audio-related parameters like tone and volume.
Overview of network and USB capabilities for music playback.
Steps to play music from a computer or media server.
Instructions for playing music from USB storage devices.
Guide to accessing and playing Internet radio stations.
Setup for powering Zone 2 speakers directly from the AV receiver.
Activating or deactivating the powered Zone 2 speaker outputs.
Instructions for selecting sources and controlling volume in Zone 2/3.
Procedure to program the remote for other manufacturers' devices.
How to teach the remote controller new commands.
Programming Macro buttons for sequential remote actions.
Steps to resolve issues with powering on the AV receiver.
Troubleshooting steps for audio output problems.
Solutions for issues related to the remote control not functioning.
Detailed technical specifications for the amplifier.
General specifications including power supply, dimensions, and weight.
To Next Page
