Integra RDC-7.1 User Manual

116
Listening Mode Setup —Continued
a. Front Effect
This option allows you to turn off the reverb for the
front speakers. This is useful when playing live material
that already contains live reverberation as the added
reverb simply blurs the original sound. When the Front
Effect is turned off, no reverb is added to the front left,
front right, and center speakers and the original
reverberation can be heard as it is.
On (Default): The Front Effect is turned on and the
reverb is added.
Off: The Front Effect is turned off.
b. Reverb Level
This option allows you to adjust the amount of reverb to
suit your listening environment, source material, and so
on. The available settings are Small, Mid, and Large.
The option defaults to “Mid.”
c. Reverb Time
This option allows you to adjust the reverb time to suit
your listening environment, source material, and so on.
The available settings are Short, Mid, and Long. The
option defaults to “Mid.”
d. Front Speaker
This option configures the front speakers to use when
playing the source. Select the speakers you want to use.
This setting can be made when the “(Speaker B) Front
L/R” is set to “Main A” in the Speaker Configuration
sub-menu.
A (Default): Outputs the source from the front speakers
configured to “Speaker A.”
B: Outputs the source from the front speakers
configured to “Speaker B.”
A+B: Outputs the source from the front speakers
configured to “Speaker A” and “Speaker B.” Note that
this option is not available when the front speakers are
in Bi-amp configuration.
e. Center Speaker
This option configures the center speaker to use when
playing the source. Select the speaker you want to use.
This setting can be made when the “(Speaker B)
Center” is set to “Main A” in the Speaker Configuration
sub-menu.
A (Default): Outputs the source from the center speaker
configured to “Speaker A.”
B: Outputs the source from the center speaker
configured to “Speaker B.”
A+B: Outputs the source from the center speakers
configured to “Speaker A” and “Speaker B.”
f. Surr L/R Sp
This option configures the surround speakers to use
when playing the source. Select the speakers you want
to use. This setting can be made when the “(Speaker B)
Surr L/R” is set to “Main A” in the Speaker
Configuration sub-menu.
A (Default): Outputs the source from the surround
speakers configured to “Speaker A.”
B: Outputs the source from the surround speakers
configured to “Speaker B.”
A+B: Outputs the source from the surround speakers
configured to “Speaker A” and “Speaker B.”
g. Surr Bk Speaker
This option configures the surround back speakers to use
when playing the source. Select the speakers you want to
use. This setting can be made when the “(Speaker B) Surr
Back” is set to “Main A” in the Speaker Configuration
sub-menu. However, when the “(Speaker A) Surr Back”
is set to “Bi-Amp for Front” or “Not Used,” this setting
will not be displayed.
• When the settings for “(Speaker A) Surr Back” and
“(Speaker B) Surr Back” in the Speaker
Configuration sub-menu differ, the available options
will be “A” and “B.”
A (Default): Outputs the source from the surround back
speakers configured to “Speaker A.”
B: Outputs the source from the surround back speakers
configured to “Speaker B.”
A+B: Outputs the source from the surround back speakers
configured to “Speaker A” and “Speaker B.”
h. Subwoofer
This option configures the subwoofer to use when
playing the source. Select the terminal to which the
subwoofer you want to use is connected. This setting
can be made when the “(Speaker A) Subwoofer” is set
to an option other than “Not Used” in the Speaker
Configuration sub-menu. However, when the “(Speaker
B) Subwoofer” is set to an option other than “Main A”
in the Speaker Configuration sub-menu, the available
options will be “A” or “Not Used.”
A (Default): Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
B: Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B: Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
Not Used: No subwoofers are used for playback.
This sub-menu allows you to configure the audio effect
and playback options when you play a source in the All
Ch Stereo or Full Mono listening modes. The settings in
this sub-menu can be made when the (Speaker A)
Center setting is set to an option other than “Not Used”
in the Speaker Configuration sub-menu.
All Ch Stereo Setup/Full Mono Setup
Sub-menu

Integra RDC-7.1 Specifications

General

Brand	Integra
Model	RDC-7.1
Category	Controller
Language	English