Integra RDC-7.1 - OSD Map (MAIN B)

To Next Page

To Previous Page

Setup Menu

—Continued

OSD Map (MAIN B)

Main B Setup

=====================

0.Hardware Setup

1.Speaker Setup

2.Input Setup

3.Audio Adjust

4.Preference

0.Hardware Setup

=====================

1.TV Format Setup

1.Speaker Setup

=====================

1.Speaker Crossover

2.Speaker Distance

3.Level Calibration

4.THX Audio Setup

2.Input Setup

==Input:XXXXXXXXX====

1.Listening Mode Preset

2.Delay

3.Audio Adjust

=====================

1.Tone Control

4.Preference

=====================

1.Volume Setup

2.OSD Setup

3.OSD Position

Reference

pages

Main menu

100

102

119

120

Main Page

Important Safety Instructions2
Precautions3
- Table of Contents4
Features6
Supplied Accessories8
- Connecting the Supplied Power Cord8
Before Using the RDC-7.19
- Installing the Batteries9
- Using the Remote Controller9
Index Parts and Facilities10
- Front Panel10
- Inner Panel12
- Rear Panel14
- Front Panel Display15
- Remote Controller (Amp Mode)16
Speaker Placement18
- Basic Speaker Placements for Home Theater and the Function of Respective Speakers18
- Placing the Speakers19
- Speaker Placement Suitable for THX Audio20
- Speaker Placement Suitable for a Music Source such as DVD-Audio20
- Available Speaker Placements According to the Number of Speakers21
- Connection Examples22
Connecting a Power Amplifier25
- Connecting a Power Amplifier Using RCA Type Cables25
- Connecting a Power Amplifier Using XLR Type Cables26
- Using Bi-Amp Connection27
Connecting Antennas28
- Connecting the Indoor FM Antenna28
- Connecting the am Loop Antenna29
- Connecting an Outdoor FM Antenna29
- Connecting an Outdoor am Antenna29
Connecting AV Components30
- Types of Connection Cables and Terminals30
- Connecting Monitors such as TV or Projector32
- Connecting a DVD Player33
- Connecting a DVD Recorder or Digital VCR (VIDEO 1)34
- Connecting a VCR (VIDEO 2, VIDEO 3)35
- Connecting a DBS Tuner, DBS TV, or BS/CS Tuner37
- Connecting a CD Player, Turntable or Tuner38
- Connecting a Recording Device such as MD Recorder, DAT Deck, CD Recorder or Cassette Deck39
- Connection Using the I.link (AUDIO) Terminal ( ) (Other than Chinese Model)40
- Connection Using HDMI Terminals43
Connecting -Compatible AV Components45
- Connections for Remote Control ( )45
- The Remote Controller Signals (IR IN)46
Connecting Components Not Reached by46
- USA and Canadian Models46
- If Remote Controller Signal Does Not Reach the RDC-7.1 Remote Sensor46
Using an External Device with 12V Trigger47
- Terminal - USA and Canadian Models47
Connecting Components Not Reached by the Remote Controller Signals (IR IN/OUT)48
- Other than USA and Canadian Models48
  - If Remote Controller Signal Does Not Reach the RDC-7.1 Remote Sensor48
  - If Remote Controller Signal Does Not Reach Other Components49
- Terminal - Other than USA and Canadian49
Using an External Device with 12V Trigger49
- Models49
Basic Operation of Remote Controller Buttons50
- To Operate the RDC-7.1 (AMP Mode)50
- To Select an Input Source50
- To Operate a Connected Component (Mode Switching)51
- To Select a Source in Zone 2 or Zone 351
- To Perform a Macro Operation51
- Customizing Your Remote Controller51
Connecting the Power/Basic Operations52
- Turning on the Power52
- Operating on the RDC-7.152
- Turning on the Power from the Remote Controller53
- Operating with Remote Controller53
Using the Listening Modes58
- Selecting the Listening Mode61
Listening to Radio Broadcasts62
- Using the Tuner62
- Tuning into a Radio Station62
Listening to RDS Broadcasts (European Models Only)64
- Listening to RDS Broadcasts64
- PTY Program Types in Europe64
- Displaying Radio Text (RT)65
- Performing a PTY Scan65
- Performing a TP Scan65
Enjoying Multichannel Playback66
- How to Connect66
- How to Set up66
- Playing Back in Multichannel Sound67
- Adjusting the Volume Level of Speakers for Multichannel Playback67
Enjoying Movies and Music in the Remote Zone (Zone 2/3)68
- Connecting and Setup68
- Enjoying Movies and Music in a Remote69
- Zone69
Recording a Source71
- Recording Audio/Video While Playing72
- Recording Audio/Video on a Component While Playing Another72
- Recording the Video from One Source and the Audio from Another Source73
Connecting Net Audio - USA, Canada, and74
- Australian Models74
- About Net-Tune74
- Networking Your RDC-7.175
- Connecting Net Audio – USA, Canada, and Australian Models75
Connecting Net Audio - Other than USA, Canada, and Australian Models76
- About Net-Tune76
- Networking Your RDC-7.177
- About Network Configuration77
- Using the Remote Controller78
- Enjoying Internet Radio80
- Playing a Music File Saved on the Net-Tune Server82
- Configuring the Music Server84
Setup Menu86
- OSD Map (MAIN A)86
- OSD Map (MAIN B)88
- OSD Map (ZONE 2)89
- Navigating the Setup Menu90
Hardware Setup91
- Remote Control Setup Sub-Menu91
- TV Format Sub-Menu91
- AM Frequency Setup Sub-Menu (Asian and Australian Models Only)91
Speaker/Output Setup92
- Speaker Configuration Sub-Menu92
- Speaker Crossover Sub-Menu93
- Speaker Distance Sub-Menu93
- Notch Filter Sub-Menu93
- Level Calibration Sub-Menu94
- THX Audio Setup Sub-Menu94
- Audio Output Assign Sub-Menu95
- Video Output Assign Sub-Menu96
Input Setup97
- Audio Assign Sub-Menu (When Input Is Other than NET AUDIO)98
- Music Server Sub-Menu (When Input Is NET AUDIO)99
- Video Assign Sub-Menu99
- Listening Mode Preset Sub-Menu100
- Character Edit Sub-Menu101
- Intellivolume Sub-Menu102
- Delay Sub-Menu102
- 12V Trigger Assign Sub-Menu102
Listening Mode Setup103
- Mono Setup Sub-Menu103
- Multiplex Setup Sub-Menu103
- Stereo Setup Sub-Menu104
- Direct, Pure Audio Setup Sub-Menu105
- Multichannel Input Setup Sub-Menu105
- I.link(Ieee1394):DVD-Audio Input Setup Sub-Menu107
- I.link(Ieee1394):Sacd Input Setup Sub-Menu108
- Dolby Digital Setup Sub-Menu109
- DTS Setup Sub-Menu110
- AAC Setup Sub-Menu111
- Dolby Pro Logic IIX/Dts NEO:6 (2Ch Input Only) Setup Sub-Menu113
- THX Setup Sub-Menu114
- Mono Movie Setup/Enhance Setup/Orchestra Setup/Unplugged Setup/Studio-MIX Setup/Tv Logic Setup Sub-Menu115
- All Ch Stereo Setup/Full Mono Setup Sub-Menu116
- Dolby Virtual Speaker Setup Sub-Menu117
- Dolby Headphone Setup Sub-Menu118
Audio Adjust119
- Tone Control Sub-Menu119
Preference120
- Volume Setup Sub-Menu120
- Headphone Level Setup Sub-Menu120
- OSD Setup Sub-Menu120
- OSD Position Sub-Menu120
I.link Setup121
- Wakeup Setup121
- OSD for DVD121
- OSD for DVD (Zone 2)121
- System Control Setup121
Network Setup122
- IP Address Sub-Menu122
- Proxy Sub-Menu122
- MAC Address Sub-Menu122
- Client Sub-Menu123
Lock/Version Setup123
- Lock Setup Sub-Menu123
- Firmware Version Sub-Menu123
Using the Remote Controller124
Operating Integraresearch/Onkyo Products Using the Remote Controller124
- Operating Integraresearch/Onkyo Products Using the Connection124
- DVD Mode124
- CD Mode126
- Minidisc Mode127
- Tape Mode128
Using the Remote Controller with Other Components129
- Entering a Remote Control Code129
- Learning Commands from Another Remote Controller136
- Using Macros137
Other Settings for the Remote Controller139
- Editing Remote Controller Modes139
- Resetting the Remote Controller141
- Using the Remote Controller with Radio Frequency (RC-555M Only)141
Changing the Remote Controller's Control ID142
Miscellaneous143
Relationship between Input Source and Listening Mode143
Using the RDC-7.1 with Option Boards - USA146
- Canada, and Australian Models Only146
- Types of the RDC-7.1 Option Boards146
- Installing the Option Boards (USA and Australian Models Only)148
Troubleshooting149
- Power149
- Audio149
- Video150
- Tuner150
- Remote Controller150
- Recording151
- Zone 2/Zone 3151
- Net-Tune151
- Others151
- Error Messages152
Specifications152
- USA and Canadian Models152
Specifications - Other than USA and Canadian Models154

Integra RDC-7.1 - OSD Map (MAIN B)

Table of Contents

Other manuals for Integra RDC-7.1

Related product manuals