Integra RDC-7.1 User Manual

77
Operations
Connecting Net Audio – Other than USA, Canada, and Australian models –
—Continued
Notes:
• To use Internet radio with the RDC-7.1, your broad-
band Internet connection needs to be up and running
and able to access the Web. Please consult your ISP if
you have any problems with your Internet connection.
• The RDC-7.1 uses DHCP and AutoIP to configure its
network settings automatically. If you want to configure
these settings manually, see page 122.
• The RDC-7.1 does not support PPPoE settings, so if
you have a PPPoE-type Internet connection, you must
use a PPPoE compatible router.
• Depending on your ISP, you may need to specify a
proxy server to use Internet radio. If your PC is con-
figured to use a proxy server, use the same settings
(See page 122).
To connect the RDC-7.1 to your Ethernet network, plug one end of a CAT5 Ethernet cable into the ETHERNET (Net-
Tune) port, and plug the other end into a LAN port on your router or switch.
The following diagram shows how you can connect the RDC
-
7.1 to your Ethernet network. Here it is connected to a
LAN port on the router, which has a 4-port 100Base-TX switch built-in.
You can connect any number of RDC-7.1s to the network, and Net-Tune Central can serve up to three clients simulta-
neously, so you can enjoy Net-Tune in three separate rooms simultaneously. The following diagram shows a Net-Tune
network with two RDC-7.1s.
You can install Net-Tune central on several networked computers and use the RDC-7.1’s Select Server setting to select
the server whose music database you want to access (See page 99).
When you use a broadband router with the DHCP function enabled, the network settings will be configured automati-
cally. In this case, you do not have to make any settings using the setup menu. If you disabled the DHCP function on
the broadband router, configure the network settings manually referring to page 122.
Networking Your RDC-7.1
L
R
L
R
FRONT
CENTER
SURR SURR BACK
SUB
WOOFER
SURR BACK R SURR R FRONT R CENTER FRONT L SURR BACK L SURR L SUBWOOFER
PRE OUT A
(
ASSIGNABLE
) (
SINGLE
)
(
SINGLE
)
(
ASSIGNABLE
) (
ASSIGNABLE
)
REMOTE
CONTROL
“Net
-
Tune”
is a trademark of
Onkyo Corporation.
ETHERNET
(
Net
-
Tune
)
22
11
66
55
44
33
22
11
C D
DIGITAL IN DIGITAL IN
OPTICAL COAXIAL
OUT
SBR SBL
SR SL
SUB C
FR
FL
E
MULTI
-
CH
IN 1
DIGITAL IN
(
BALANCED
)
AES/EBU
DIGITAL IN
(
BALANCED
)
AES/EBU
AUDIO IN
1
3
2
1
PH
2
3
9
8
7
6
5
4
4
5
LRRL
GND
OUT
LR
LR
R L
F
G
L
IN 1
IN 2
HDMI, the HDMI logo
is a trademark
or registered
trademarks of HDMI
Licensing LLC.
OUT
HDMI
S VIDEO VIDEO
IN IN
IN
1
IN 2
3
2
1
Y
P
B
P R
COMPONENT
VIDEO
IN 3
IH
6
5
4
Y
P
B
P R
2
1
4
3
S VIDEOS VIDEO VIDEOVIDEO
OUT OUT
OUT 1
J
OUT
(
HD/BNC
)
Y
P
B
P R
Y
P
B
P R
COMPONENT VIDEO
IN
(
HD/BNC
)
A
C
B
MAIN
12V
TRIGGER
OUT
IR
UJJ
D
E
200mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
100mA MAX.
ZONE 2
ZONE
3
L
R
L
R
CENTER
SURRFRONT SURR BACK
SUB
WOOFER
PR E OUT B
AC INLET
MODEL NO. RDC
-
7.1
(
ASSIGNABLE
)
(
SINGLE
)
A B
RS 232
OUT
IN
K
ANTENNA
FM
75
AM
ETHERNET
(
Net
-
Tune
)
PC
To the LAN
side port
To the LAN
side port
To the WAN side
Internet radio
Modem
Router
LAN port/
Ethernet, etc.
RDC-7.1
PC
Internet radio
To the WAN side
Router
To the LAN side port
To the LAN side port
To the LAN side port
Modem
Room 1 Room 2
About Network Configuration

Integra RDC-7.1 Specifications

General

Brand	Integra
Model	RDC-7.1
Category	Controller
Language	English