Safety
336521 65
The power supply must meet the RoHS requirements for the European Union, Peoples
Republic of China and other countries which have adopted the RoHS requirements for
banned materials.
9.3 Proscribed Materials - REQUIRED
The following materials must not be used during design and/or manufacturing of this
product:
Cadmium shall not be used in painting or plating - REQUIRED.
Quaternary salt and PCB electrolytic capacitors shall not be used - REQUIRED.
CFC's or HFC's shall not be used in the design or manufacturing process -
REQUIRED.
Mercury shall not be used - REQUIRED.
Some geographies require lead free or RoHS compliant power supplies -
REQUIRED.
9.4 Catastrophic Failure Protection - RECOMMENDED
Should a component failure occur, the power supply should not exhibit any of the
following:
Flame
Excessive smoke
Charred PCB
Fused PCB conductor
Startling noise
Emission of molten material
Earth ground fault (short circuit to ground or chassis enclosure)
§§
To Next Page
Loading...
Need help?
General
