Intel Desktop Board D2500CC Product Guide
30
Installing a PCI Express Mini Card
You can install a PCI Express Full-Mini Card or a PCI Express Half-Mini Card in the
Desktop Board’s PCI Express Mini Card slot.
To install a Full-Mini Card, see Figure 10 and follow these steps:
1. Observe the
precautions in "Before You Begin" on page 23.
2. Insert the card into the PCI Expres
s Mini Card connector (Figure 10, A) at a
sligh
tly upward angle.
3. Align the card’s mounting holes over the board’s steel mounting posts
(Figure 10, B) and attach the card
with the supplied screws.
To install a Half-Mini Card, follow these steps:
1. Observe the precautions in "Before You Begin" on page 23.
2. In
stall the mounting posts in the mounting holes as shown in Figure 10, C.
3. Insert the card into the PCI Expres
s Mini Card connector (Figure 10, D) at a
sligh
tly upward angle.
4. Align the card’s mounting holes over the board’s steel mounting posts
(Figure 10, E) and attach the card
with the supplied screws.