Intel Desktop Board DX58SO2 Technical Product Specification
14
1.2 Legacy Considerations
This board differs from other Intel Desktop Board products, with specific changes
including (but not limited to) the following:
• No parallel port
• No floppy drive connector
• No serial port
• No PS/2 connectors
1.3 Online Support
To find information about… Visit this World Wide Web site:
Intel Desktop Board DX58SO2 http://www.intel.com/products/motherboard/index.htm
Desktop Board Support http://www.intel.com/p/en_US/support?iid=hdr+support
Available configurations for the Intel
Desktop Board DX58SO2
http://ark.intel.com
Supported processors http://processormatch.intel.com
Chipset information http://www.intel.com/products/desktop/chipsets/index.htm
BIOS and driver updates http://downloadcenter.intel.com
Tested memory http://www.intel.com/support/motherboards/desktop/sb/CS-
025414.htm
Integration information http://www.intel.com/support/go/buildit
1.4 Processor
The board is designed to support the Intel Core i7 and Intel Xeon Processors in an
LGA1366 socket.
Other processors may be supported in the future. This board is designed to support
processors with a maximum wattage of 130 W. The processor listed above is only
supported when falling within the wattage requirements of the Intel Desktop Board
DX58SO2. See the Intel web site listed below for the most up-to-date list of
supported processors.
For information about… Refer to:
Supported processors http://processormatch.intel.com
CAUTION
Use only the processors listed on the web site above. Use of unsupported processors
can damage the board, the processor, and the power supply.
#
INTEGRATOR’S NOTE
This board has specific requirements for providing power to the processor. Refer to
Section 2.5.1 on page 56 for information on power supply requirements for this board.
To Next Page
Loading...
Need help?
General
