3-6 PRO/100 LAN+Modem PC Card User’s Guide
9a For Windows NT 3.51 with Service Pack 5 or greater, specify:
\A:
9b For all other versions of Windows NT 3.51 specify:
A:\NT351.
Click OK.
10 Select Intel EtherExpress PRO/100 LAN+Modem PC Card and
click OK.
11 At the PRO/100 PC Card Setup screen, choose appropriate
settings. Click OK.
12 The Network Settings screen should show Intel EtherExpress
PRO/100 LAN+Modem PC Card under Installed Adapter Cards.
Click OK.
13 At the Network Settings Change screen, remove the Intel disk from
the disk drive and click Yes. The computer will be shutdown and
restarted.
14 To install the country identifier utility under any version of Win-
dows NT 3.51, run the Intel Installation Program from Intel Disk 1,
Installation Disk. Use the Program Manager File/Run sequence.
Type A:\SETUP in the Command Line box, and click OK. The
country identifier utility will be copied to your hard drive and an
icon installed in the Startup Group and Intel Mobile Program
Group. The program can be run by clicking on the appropriate icon,
or it will load automatically the next time the computer is restarted.
To Next Page
Loading...
Need help?
General
