Need help?Do you have a question about the Intel EP80579 and is the answer not in the manual?
General| Brand | Intel |
|---|---|
| Model | EP80579 |
| Category | Computer Hardware |
| Language | English |
Details the structure and chapters of the user's guide, including topic overviews.
Lists hardware, software, and platform documents relevant to the development process.
Defines acronyms used throughout the document for clarity and understanding.
Overview of the Intel® EP80579 Development Kit's product specifications.
Details functional blocks and architectural design of the Intel® EP80579 Development Board.
Summarizes major features of the Intel® EP80579 Development Board, including form factor and I/O.
Lists components included in the complete Intel® EP80579 Development Kit package.
Details the Input/Output (I/O) capabilities of the Intel® EP80579 Development Board.
Describes system memory features, including DIMM sockets and DDR2 support.
Outlines key features and capabilities of the Pre-boot Firmware.
Describes the types of mezzanine cards supported by the Intel® EP80579 Development Board.
Provides product names, codes, and MM# for ordering the development kit and accessories.
Illustrates the power distribution for the Intel® EP80579 Development Board.
Explains the clock synthesizer and configuration for host differential pair clocks.
Depicts the reset logic and signaling for the Intel® EP80579 Development Board.
Describes the SMBus implementation and block diagram for system management.
Shows front, back, and side views of board components and connectors.
Details how to configure IA-32 core frequency using jumpers and signals.
Lists SMBus device addresses and their corresponding power rails.
Explains system LEDs used as indicators for system signals and voltages.
Describes the location and usage of jumper blocks for configuration.
Describes the location and purpose of various headers on the development board.
Details pinout information for various connectors and headers on the board.
Details power and current specifications for the development board.
Discusses thermal management, processor throttling, and shutdown mechanisms.
Introduces the Pre-boot Firmware, its execution, and storage.
Describes the sequence of events during the Pre-boot Firmware boot process.
Outlines key features and capabilities of the Pre-boot Firmware.
Explains how to redirect video/keyboard via serial port for remote access.
Covers procedures for recovering and updating the Pre-boot Firmware.
Details choices available for booting the system and their precedence.
Describes security features like supervisor/user passwords for setup access.
Details procedure for clearing CMOS settings on the development board.
Guides on assembling and preparing the development kit for operation.
Provides essential safety precautions for handling and operating the development board.
Details how to connect SATA cables to drives, recommending Port 0 for boot.
Guides on the procedure for installing the 1 GB DDR2-800 DIMM.
Details how to connect the heatsink and fan to the processor.
Guides on installing a PCIe x1 graphics adapter card into available slots.
Details connecting a serial cable for remote console access.
Details connecting ATX12V power supply cables to the board.
Provides procedure for powering up the Intel® EP80579 Development Board.
Guides on installing optional mezzanine cards onto the development board.
Provides information on audible error messages (beep codes) during POST.
Displays error messages that occur during POST and their descriptions.
Explains how to use debug messages for EFI error determination.
Lists necessary tools and consumable items for processor extraction and insertion.
Details steps for safely extracting the processor using specialized tools.
Guides on procedure for correctly inserting a new processor into the socket.
To Next Page
