Intel ETHEREXPRESS PRO/100 User Manual

4-34 PRO/100 LAN+Modem PC Card User’s Guide
tion to activate serial port emulation. The COMx keyword can also be
stated on the command line with the modem-only driver
IMENABLE.COM.
Use the keywords COMIRQ and COMBASE to override the values set
with COM1, COM2, COM3, or COM4 in case of a conflict between LAN
and modem settings.
Sample NET.CFG File (ODI Driver) with COM Port Setting
LINK DRIVER M16BODI
INT 10
PORT 280
MEM D2000
COM3
Sample PROTOCOL.INI (NDIS Driver) with COM Port
Setting
[INTELNET]
DRIVERNAME=INTEL$
IRQ=10
IOADDRESS=0X320
MEM=0XD2000
MODE=IO
COM4
Sample Packet Driver Command Line with COM Port
Setting
M16BPD COM3 MEM=D8000
Sample IMENABLE.COM Command Line
IMENABLE COM3 MEM=D8000

Intel ETHEREXPRESS PRO/100 Specifications

General

Device Type	Network adapter
Form Factor	Plug-in card
Data Link Protocol	Ethernet, Fast Ethernet
Data Transfer Rate	100 Mbps
Compliant Standards	IEEE 802.3, IEEE 802.3u
Connector Type	RJ-45
Bus Type	PCI
Chipset	Intel 82557
Full Duplex Support	Yes
Wake-on-LAN Support	Yes
Ports	1 x RJ45
Data Rate	10 Mbps / 100 Mbps
Operating Systems Supported	Linux, Windows