50
Chapter 6. Managing Files on the Reader
NOTE: You can rename any text le that you capture using the Reader. You
cannot rename text les that you download to the Reader from another source.
To rename the le that is playing or paused:
Press the Options button while the le is playing or paused. The Options menu
appears. Select Rename and press OK. The Enter New Name screen appears.
To enter the new name, press the down arrow button to nd a letter, or press the
up arrow button to nd a number. Then press OK to advance to the next eld. To
leave a space between words, press the right-pointing arrow when you reach a
blank eld. Then start the new word in the next eld. Each word automatically
begins with a capital letter.
Your le name can be up to 50 characters long. When you nish, press OK twice.
A conrmation message appears. Select Yes on the message, and press OK
again. Another conrmation message displays the le name change.
To rename a le that is not playing:
Select the le you want to rename, but do not open it. Press the Options button,
and then select Rename. To enter the new name, press the down arrow button
to nd the rst letter. To nd a number, press the up arrow button. After making a
selection, press OK to advance to the next eld.
If you want to leave a space between words, press the right-pointing arrow when
you reach a blank eld. Then start the new word in the next eld. Each word
automatically begins with a capital letter. When you nish, press OK twice. A
To Next Page
Loading...
Need help?
General