29
Reader User Manual
Chapter 5. Capturing and Playing Files
Introduction
Chapter 3 of this manual provides the basic information about how to use
the Reader to convert printed text into digital text and listen to the playback.
This chapter provides additional information about capturing multiple pages,
navigating in text and audio les, and using other Reader features to help you
view and play your les.
Setting the Camera Flash
The Reader includes a camera ash that you can turn on or off when the Reader
is in Shoot mode. To change the ash setting, press the Shoot button once or
select Shoot Mode from the Home menu.
When the Reader enters Shoot mode, press the Options button. The Shoot
Options menu appears. Select Flash Setting and press OK. On the Flash
Setting menu, select one of the settings: Automatic Flash makes the ash
ready for use. Automatic Flash is the default setting. Turn Flash Off turns off
the ash. You are then returned to Shoot mode to capture text with the new
ash setting.
NOTE: Even when you have the Automatic Flash setting turned on, the
camera ash might not activate if there is adequate lighting to capture the
image. If you turn the Reader off after turning off the ash, the Automatic
Flash setting will be restored when you re-start the Reader.
To Next Page
Loading...
Need help?
General