88
Appendix B. Updating Your Reader Software
About the Software Update Process
The software that comes installed on your Reader is version 1.0.1. To ensure that
you always have the latest features installed on your Reader, you can periodically
update this software with newer versions that will be available at the following
web site: http://downloadcenter.intel.com. Visit this site from time to time, to
learn whether there are new features to install.
There are two ways to update your software:
• Connect your Reader to a computer and copy the updated software to the
Reader.
• Connect a ash drive to your computer, and copy the updated software
to the drive. Then connect the ash drive to the Reader and apply the
updates.
The following sections provide details about each method.
NOTE: After you update your software version, you cannot re-install an older
version.
Before you begin updating your software, you might want to note the software
version on your Reader, so that you can tell if there is a more recent version
on the web site. To check your current software version, select Help from the
Home menu and press OK. Then select About and press OK again. On the
Intel Reader screen, your software version appears on the rst line.
To Next Page
Loading...
Need help?
General