64
Chapter 7. Customizing the Reader
Choosing the Voice Pitch
To adjust the pitch of the voice, go to the Voice menu. Select Voice Pitch and
press OK. The Voice Pitch menu appears. The Reader announces the menu
name and the selected voice pitch.
Select either Very Low, Low, Normal, High, or Very High. As you make a
selection, the Reader plays the voice at the selected pitch, even if you turned
off the menu reading option. Press OK to select the pitch. Then press Back to
return to the Voice menu.
Security Settings
You can set an optional four-digit Personal Identication Number (PIN) to keep
your les more secure. Each time you turn the Reader on, you must enter the
PIN to access your les.
Turning On PIN Protection
To turn on PIN protection, go to the Settings menu and select Security. On the
Security menu, select Turn On PIN Protection. Press OK.
When the Turn On PIN? prompt appears, select Yes and press OK. The Enter
PIN screen appears. On this screen, you will use the up and down arrow buttons
to select four digits for your PIN.
To Next Page
Loading...
Need help?
General