Intelbras ACtion RF 1200 - Page 21

21
WAN IPv6 conguration screen
The menu WAN IPv6 settings groups the settings related to your IPv6 Internet connection. Below we will explain each
available option.
» IPv6: allows you to enable/disable IPv6 on the Internet port of the router.
» Connection type: there are 3 possible connection modes:
» DHCPv6: use this mode if your connection details are provided automatically through a DHCPv6 server.
» PPPoEv6: use this mode if your Internet access requires authentication via PPPoE. In this mode you need a user and
password to authenticate with your operator or ISP. You must enter the user in the eld Enter your provider’s user and
your password in the eld Enter your provider’s password.
» Static IPv6: use this mode if your Internet access is provided via a static IPv6 address. All information for the con-
guration in this mode must be provided by your Internet operator.
» Obtain a Stateful address: if your operator or ISP delivers the address via DHCPv6 Stateful, check this option.
» Obtain Prex Delegation: if your operator or ISP delivers the LAN prex via Prex Delegation, check this option.
Note: the options Obtain Stateful Address and Obtain Prex Delegation are only displayed for the modes PPPoEv6
and DHCPv6 .
When you nish the settings, click on the button Save to apply the changes.
IPv6 LAN conguration