EasyManuals Logo

Intellian Intelligent Mediator User Manual

Intellian Intelligent Mediator
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
43
Aptus Web for the Mediator
No. Item Description
2
Current
Modem
Port
- Subnet Mask: Factory
default(255.255.255.0).
- Gateway: Factory
default(192.168.0.1).
- DNS: Current default DNS Address is
assigned to.
- NAT Routing: Enable/Disable NAT
routing.
- TCP Modem Protocol Port: This
function is not available.
- UDP Modem Protocol Port: This
function is not available.
3
Management
Interface
Conguration
Displays Management Port’s network
conguration.
- IP Address: Mediator’s front network port
/Factory default(192.168.2.1).
- Subnet Mask: Factory
default(255.255.255.0).
- Lease Start Address: Lease IP address
start range.
- Lease End Address: Lease IP address
end range.
- Lease Time: Lease IP address update
time.
No. Item Description
4
Network
Service
Conguration
Displays Management Service
conguration.
- Telnet Service: Enable or disable
telnet login support.
- HTTPS Port: HTTPS port number.
- SSH Service: Enable or disable CLI
connection via SSH service.
5
Browser
Conguration
Set refresh rate and refresh disable time.
- Refresh Rate: Set the browser refresh
rate (Default 1 seconds. Range 1~99).
- Refresh Disable Time: Set the browser
idle timeout (Default:9 minutes. Range
0~9). To use this function, check the
checkbox.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intellian Intelligent Mediator and is the answer not in the manual?

Intellian Intelligent Mediator Specifications

General IconGeneral
BrandIntellian
ModelIntelligent Mediator
CategoryController
LanguageEnglish