1. Do not expose the product to rain, snow, water mist or dusty environments to prevent
danger and malfunctions. Do not cover or block the ventilation holes of the product.
Keep a distance of at least 10 cm the Charger to allow air to circulate around
to help dissipate heat.
As shown below
flammable materials. appropriate length and cross section size Do not Install near Use
of cables (for details, see sections 4). Using inappropriate sized cables can
damage the product.
2. This product contains internal components that may cause arcing or sparking. To avoid fire or
explosion, do not install it in an enclosed space with batteries or flammable materials.
(Including any space containing gasoline-powered machinery, fuel tanks, fittings, accessories,
and other fuel system components) Do not install in the same location as a battery that could emit
explosive gasses. The produced by a being charged can be extremely corrosive gasses battery and
. Prolonged exposure may damage the product. explosive
Please read the user manual carefully before use and follow the instructions in the manual.
1-1 General Safety
WARNING
1. Safety Instruction
10CM
10CM
OUT
IN
+
-
+
Input Voltage
Output Voltage
Output Current
BMS
Ignition / Enable
Error
2
To Next Page
Loading...
Need help?
General